Error codes for Blomberg Refrigerator that can be fixed by yourself

Er01

What can a user do without professional help?

  1. Make sure that there is stable water supply to the washer
  2. Verify that hoses connected to the water supply are not bent
  3. Make sure that mesh filters of the WM inlet valve are not blocked or clogged

4. Verify that the inlet valve does not have any electrical/mechanical failures

Er02

What can the user do without professional help?

  1. Check and make sure that the drain pump filter is not blocked
  2. Verify the drain pump is not clogged up
  3. Make sure that outlet hoses are not blocked
  4. Make sure that the drain pump can operate properly
  5. Check the wire harness of the drain pump to make sure it’s secure

Er03

The trouble can be solved with the help of a professional

Er04

The trouble can be solved with the help of a professional

Er05

The trouble can be solved with the help of a professional

Er06

The trouble can be solved with the help of a professional

Er07

What can the user do without professional help?

  1. Make certain that the WM door is fully closed
  2. Check the door latch
  3. Inspect the door catch
  4. Check wires of the lock
  5. Inspect the WM door lock carefully

Er09

What can the user do without professional help?

  1. Check the connection for program selection
  2. Make certain the wiring is in an appropriate condition
  3. Check the electronic control board of your WM

Er10

What can the user do without professional help?

  1. Check the connector block of the water level sensor
  2. Make certain the wiring is proper
  3. Check the electronic control system of your WM

Er11

The trouble can be solved with the help of a professional

Er12

What can the user do without professional help?

  1. Check whether the WM door is fully closed
  2. Check the connection block of the door lock
  3. Inspect the wires of the WM door lock

Er13

The trouble can be solved with the help of a professional

Er18

What can the user do without professional help?

  1. Check whether the washer is receiving right voltage
  2. Measure voltage with the help of a meter
  3. Check fuse/breaker

Error codes for Blomberg refrigerator which need professional assistance:

Er05

Defect of the temperature sensor found

Er06

Defect of the temperature sensor found

Er09

No communication between the control and motor control modules

Er17

Aqua-stop error

Er20

Spin cycle terminated

Leave a Reply