Do you have a Samsung dryer that won’t spin? If so, you are not alone. Many people experience the same issue with their Samsung dryers. Fortunately, there are a few common reasons why this may be happening. Learning the potential causes can help you troubleshoot and get your appliance working again quickly.
The motor coupling connects the motor to the dryer drum and is made of plastic. Over time, this part can become worn out due to heat or age. When this happens, it no longer provides a strong connection between the two parts, which can cause them to separate, and the appliance will not spin.
If you find that your Samsung dryer does not spin, you may need to replace your motor coupling in order for it to work properly again. Replacing it can be done relatively easily by any do-it-yourself enthusiast with basic tools and knowledge of appliances.
First, unplug your dryer from power and shut off its gas valve if it runs on gas. Next, locate your old motor coupling using your owner’s manual or by looking behind the front panel or inside the cabinet at the back of your machine. Remove all screws that attach it to both parts and then disconnect them completely before installing a new one in its place, following manufacturer instructions carefully.
Finally, reassemble everything back together and test whether your Samsung dryer spins correctly now that you have successfully replaced its bad motor coupling component!
One of the most common causes of a Samsung dryer drum not spinning is a blocked exhaust vent. The exhaust vent plays an important role in the functioning of the dryer, as it helps to push hot air out from the appliance and maintain its temperature. If this vent is blocked or lint has built up inside, it can reduce airflow and cause the dryer to not spin.
To properly clean and maintain an exhaust vent, use a vacuum cleaner with a brush attachment and thoroughly clean both the inside and outside of the ventilation pipe. In addition to cleaning out lint buildup, make sure that all parts are securely fastened together so that no air can escape through any gaps. Once everything is cleaned properly, you can restart your machine and test for proper operation.
A broken belt is a common issue that can cause the Samsung dryer to not spin. The belt’s purpose is to rotate the drum of the dryer as it runs its cycle. If it breaks, then the drum cannot move, and your clothes will stay wet after a cycle has been completed.
To check if this is your problem, you should open up the cabinet and take a look at the belt itself. If it appears frayed or broken, you’ll need to replace it with a new one. You will need to first unplug your appliance and remove the screws on the back panel that secure it in place.
Once removed, you can access the interior components of your device and carefully remove any wires or hoses connected to them. From here, you can inspect and replace the drive belt by following any instructions provided with your new part.
After replacing your drive belt, make sure all connections are secured properly before re-installing your back panel and plugging in your appliance again for use.
Child Lock is a safety feature on some Samsung dryers that prevents the controls from being accidentally changed. It’s a great feature that can prevent children from messing with the settings, but unfortunately, it can also cause issues if you aren’t aware of its existence. If Child Lock is enabled, none of the buttons will work to start a spinning cycle.
To check if this is the issue, look for a “Child Lock” button or symbol – typically, the icon may look like a baby or a lock with a smiley face. Press this button for 3 seconds to deactivate the lock. Once done, try again to run your cycle and see if this resolves your problem.
Drum bearings are small, round metal parts that support the outer drum and enable it to rotate smoothly. If bearings become worn, they can cause friction and prevent the drum from spinning properly. The only way to fix this issue is by replacing these components with new ones.
It is important to note that replacing drum bearings does require some technical know-how, so if you don’t feel comfortable doing it yourself, call a professional for assistance. Experienced technicians will be able to diagnose any underlying problems with your dryer and replace any faulty parts that may be causing your machine to malfunction. They will also be able to guide how best to maintain your machine to avoid future issues like this one.
REFERENCES
https://www.samsung.com/us/support/troubleshooting/TSG01001987/
Looking for Samsung dryer repair services? Our company has many years of experience in servicing large laundry appliances. We can repair any dryer, regardless of brand, modification, year of manufacture.
Book online
Other Articles
Fix a non-spinning Samsung washer by following these troubleshooting steps for a quick solution.
Learn how to fix your Samsung washer if it’s not draining properly with these helpful steps.
Fix a bottom leak in your Samsung washer with these easy-to-follow steps to prevent further damage.
