Maytag Ranges, Stoves and Ovens Error Codes – What You Need To Know!

Is everything alright with your oven, or your stove is agitating you by not doing well? And if your range is annoying you from a few days then what are you waiting for? Appliance Repair Expert is a repair always available to fix your range , stove or oven with the team of expert technicians.

Important: These codes are provided for your reference only to help you overcome some minor issues with your home appliances. Once you are not sure about the remedies or other actions concerning the repairs, we recommend you to call some repair service agency to have the work done for you.

Error codes for Maytag Ranges, Stoves and Ovens

ERROR CODE	CONDITION	DIY ADVICE
F0	Your cooking appliance has a function key stuck	Your cooking appliance has a function key stuck.We recommend replacing the touchpad or having the clock ERC unit repaired.
F1	This error occurs if some malfunction is detected within the touchpad/membrane on board	This error occurs if some malfunction is detected within the touchpad/membrane on board It is necessary to have the timer unit (ERC), the touchpad, or the membrane replaced. In most cases, you will have to install a new touchpad instead of the faulty one.
F2	This error code is returned in case your Maytag oven becomes too hot	Inspect the relay unit and the thermal sensor for any malfunction and have them replaced if they are faulty.
F3	This error code indicates that cooking appliance has the thermal sensor is open or shorted	We recommend you to have the oven thermal sensor replaced.
F4	This error code indicates that the thermal sensor installed in the cooking appliance is open or shorted	We recommend you to have the oven thermal sensor replaced.
F5	This error signals about some hardware issues or watchdog circuits failure	Examine the clock unit (ERC) for any malfunction and have it repaired if necessary.
F6	There is no alternate current signal to the main unit	Inspect your electricity mains and have it tested for the appropriate voltage.
F7	Once you see this error, the cooking appliance has the function key shorted, or the touchpad has a stuck key	Try unsticking the button. If that doesn’t help, have the touchpad or the clock assembly unit repaired or replaced with a new one.
F8	The code is returned in case there is an analog-digital issue	Have the clock unit (ERC) checked, repaired, or replaced with a new one.
F9	You will see this error in the case of some door latch problem	Have the door lock circuit tested and repaired if faulty or have the clock unit (ERC) repaired or replaced with a new one.