Code Error Solution Error & Solution

F0
Your cooking appliance has a function key stuck
Your cooking appliance has a function key stuck. We recommend replacing the touchpad or having the clock ERC unit repaired.

F1
This error occurs if some malfunction is detected within the touchpad/membrane on board
This error occurs if some malfunction is detected within the touchpad/membrane on board It is necessary to have the timer unit (ERC), the touchpad, or the membrane replaced. In most cases, you will have to install a new touchpad instead of the faulty one.

F2
This error code is returned in case your Maytag oven becomes too hot
Inspect the relay unit and the thermal sensor for any malfunction and have them replaced if they are faulty.

F3
This error code indicates that cooking appliance has the thermal sensor is open or shorted
We recommend you to have the oven thermal sensor replaced.

F4
This error code indicates that the thermal sensor installed in the cooking appliance is open or shorted
In this situation, unplug the appliance and examine wiring connections on the sensor. If they are all right, replace the sensor.

F5
This error signals about some hardware issues or watchdog circuits failure
Examine the clock unit (ERC) for any malfunction and have it repaired if necessary.

F6
There is no alternate current signal to the main unit
Inspect your electricity mains and have it tested for the appropriate voltage.

F7
Once you see this error, the cooking appliance has the function key shorted, or the touchpad has a stuck key
Try unsticking the button. If that doesn’t help, have the touchpad or the clock assembly unit repaired or replaced with a new one.

F8
The code is returned in case there is an analog-digital issue
Have the clock unit (ERC) checked, repaired, or replaced with a new one.

F9
You will see this error in the case of some door latch problem
Have the door lock circuit tested and repaired if faulty or have the clock unit (ERC) repaired or replaced with a new one.