Doing laundry can be tedious, but when your dryer won’t spin, it can become even more of a chore. A broken machine is a huge inconvenience, leaving you frustrated and without clean clothes. Many people don’t know what causes their dryer to malfunction or how to troubleshoot and repair it. Below we will discuss 6 reasons for this breakdown so you can quickly get back to doing laundry.
The dryer belt turns the drum as it rotates during its drying cycle. Over time, this part can become worn out, frayed or break altogether due to continuous use. When this happens, your dryer cannot turn its drum and complete its cycle.
To fix this problem, you need to disassemble the dryer, remove the old belt and install a new one. It’s a relatively straightforward process, but it can be challenging if you’re not familiar with the appliance’s inner workings. You can find step-by-step instructions in the owner’s manual or online tutorials.
The motor powers the drum’s rotation, and if it’s not functioning correctly, the dryer will not spin. A motor malfunction can be caused by a variety of reasons, such as worn bearings, blown windings or a faulty motor switch.
To identify if there’s an issue with the motor, you may need to call in a technician who specializes in repairing dryers. A professional will be able to diagnose the problem effectively and quickly. They’ll also have access to specialized tools to test various parts of your dryer.
It’s essential not to try fixing the issue yourself unless you’re experienced with fixing dryers. Attempting DIY repairs can lead to further damage or even injury, especially when dealing with electrical components like motors.
The door switch is an essential component that signals the dryer to start running when the door is closed. If it’s not functioning correctly, the dryer may assume the door is open and refuse to operate. This issue can be caused by a damaged or worn-out switch or a malfunctioning mechanism.
To fix this problem, you need to inspect the door switch thoroughly. Check for any visible signs of damage, such as cracks or breaks in its structure. You can also use a multimeter to test its continuity and ensure it’s delivering power properly. If your door switch is defective, consider replacing it with a new one as soon as possible.
The blown thermal fuse is another common reason your dryer does not spin. This component protects the device from overheating by opening a circuit when it senses high temperatures. If the thermal fuse is blown, it will cut off power to the motor and prevent the appliance from spinning.
It’s important to note that a blown thermal fuse cannot be repaired and must be replaced with a new one. Trying to bypass this safety feature can lead to serious consequences such as fire hazards and electrical shocks.
The drum roller supports the dryer’s drum and allows it to rotate smoothly during a cycle. When this component becomes worn or damaged due to wear and tear, it can cause the dryer to stop spinning.
If you suspect that a failed drum roller is causing your dryer’s malfunction, there are several steps you can take to diagnose and fix this issue. First off, unplug your appliance before attempting any repairs. Then remove the front panel of your machine and check each of the rollers for damage or excessive wear. If you notice any issues with one or more rollers, it’s best to replace them all simultaneously since they tend to wear out around the same time.
It is essential to ensure that the new drum roller is compatible with your dryer model to avoid complications. If you’re unsure about how to replace it or which parts to purchase, it is best to consult a professional technician. They can help you identify the issue and provide the necessary repairs to get your dryer up and running again.
The exhaust vent plays an important role in the dryer’s functioning, as it helps to push hot air out from the appliance and maintain its temperature. If this vent is blocked or if lint has built up inside, it can reduce airflow and result in the dryer machine not spinning.
To clean a clogged vent, start by unplugging your dryer and pulling it away from the wall. Then, disconnect the vent hose from both the back of your dryer and the exhaust port on your wall. Use a vacuum cleaner or cleaning brush to remove any debris from inside the hose and exhaust port.
Next, check for any blockages inside the vent itself using a flashlight or similar tool. If you find any obstructions, use a flexible brush or snake to gently push them free. Once everything is clear, reattach all connections securely before plugging in your dryer again.
Regular maintenance can help prevent clogs from occurring in the first place. Be sure to clean out your lint trap after every load of laundry and have your vents professionally cleaned at least once yearly to keep things running smoothly.
REFERENCES
Lee, Jiyul, Changsang Yun, and Chung Hee Park. “Effect of Fabric Characteristics and Drum Rotation Speeds on the Movements and Drying Performances of Clothes in a Tumble Dryer.” Fibers and Polymers 23.6 (2022): 1741-1752.
https://link.springer.com/article/10.1007/s12221-022-4802-z
Repair and maintenance of a dryer at home can be convenient and reliable. Our masters will come to your house at any time convenient for you and make repairs. We can handle repair of any complexity, fixing all brands and models of modern appliances.
Book online
Other Articles
Fix a non-spinning Samsung washer by following these troubleshooting steps for a quick solution.
Learn how to fix your Samsung washer if it’s not draining properly with these helpful steps.
Fix a bottom leak in your Samsung washer with these easy-to-follow steps to prevent further damage.
