How To Reset The Electrolux Dishwasher Error Code 50?

Electrolux dishwasher error code 50 appears when the motor, or more specifically, the circulation pump, fails. It might be caused by a power outage or a malfunction of the circulation pump, which is in charge of supplying water to the nozzles.

What are the main causes of circulation pump failure?

If the dishwasher draws water but does not wash dishes, don’t replace the circulation pump right away. This component is quite durable and only fails in rare instances. Trash filters and spray nozzles are becoming more clogged. As a result, the issue begins to manifest.

Turn the dishwasher off, open the door, and inspect the washing chamber’s bottom. A plastic item that looks like glass and a metal mesh may be found there. Clean the mesh or “glass” if it is blocked with food leftovers before re-running the device.

The sprinkler impeller should also be thoroughly examined. Remove the impeller and use a toothpick or a needle to clean each hole. Issues will disappear if water is allowed to flow properly.

Listen to how the machine sounds after the water acquiring procedure to ensure that the circulation pump has failed. If the appliance stops working after obtaining water without making any noises, the circulation pump is almost certainly malfunctioning (98 percent of the time).

If you hear a noise, but the unit does not wash dishes, you must first remove it from the tracts before moving on to the components. Electrolux dishwasher error codes, in this case, are essential since they warn you about the coming problem.

Steps that will help you fix the problem

1. Turn the dishwasher over. Take out the bottom (unscrew it).
2. Unplug the wiring if necessary. All cables, including the nozzles, should be disconnected. Place all of the pieces in the sequence in which they were dismantled so that you can reassemble them correctly.
3. Clean all components thoroughly with a detergent. If any components are worn out, replace them with new dishwasher-safe parts.
4. Replace any worn seals, such as O-rings or other washers.
5. Assemble the pump by attaching the components in reverse order.

You can generally just clean the pump. However, if the dishwasher has other issues than the pump, do not attempt to repair it on your own.

Author: Jacob Dillard